I designed them all flush at first which brought on the tracks not to be extended ample, And so the 3rd leaf overlapped the edge on the table by about one centimeter. Leaving that excess inch (of the block sticking earlier the tracks) will help you to thoroughly lengthen the table, add the 3rd leaf, then drive the table closed just before latching.
In part of phase 6, I made use of one of several brackets (II) to turn FF Because the mini screwdriver wouldn't in good shape among the shelves. I do not believe this phase may very well be accomplished out of purchase, so you only really have to make thanks. It a bit bent the bracket, but there ought to be one excess inside the spare components ba
Partly of phase 6, I utilised one of several brackets (II) to show FF For the reason that mini screwdriver wouldn't fit between the shelves. I do not believe this stage could be carried out away from get, so you only should make thanks. It slightly bent the bracket, but there should be 1 more from the spare parts bag. Either way, it remains to be u
five. In stage fourteen, when setting up the tracks (DD) to the Wooden blocks (R), hold the wood block stick out about an inch past the sting from the tracks for your side that should attach to the top piece (K and The remainder). The other two blocks ought to be flush with the end of the tracks that connect to The cupboard piece.I produced them al
I produced all of them flush at the beginning which triggered the tracks not to be extended more than enough, Therefore the 3rd leaf overlapped the sting on the table by about one centimeter. Leaving that more inch (of your block sticking past the tracks) will allow you to thoroughly extend the table, incorporate the 3rd leaf, then drive the table